Minnesota Vikings vs Pittsburgh Steelers Match Player Stats: The Plays Behind Pittsburgh’s Dramatic Dublin Win
The Pittsburgh Steelers were leading 24–6 in the fourth quarter when the Minnesota Vikings turned a quiet finish into a tense one. Carson Wentz threw two touchdown passes, Minnesota closed the gap to three points, and the Vikings got one final chance to tie the game. Pittsburgh’s defense held firm, securing a 24–21 win at Croke Park in Dublin on September 28, 2025.
The minnesota vikings vs pittsburgh steelers match player stats tell more than the final score. Minnesota gained more total yards and had two receivers finish above 100 yards. Pittsburgh, however, ran the ball more effectively, scored on a huge pass play, and put Wentz under pressure throughout the game. Those differences explain how the Steelers built a large lead and survived the Vikings’ late comeback.
How the Game Unfolded
Minnesota scored first with a field goal, but Pittsburgh responded with a short touchdown run by Kenneth Gainwell. Early in the second quarter, DK Metcalf turned a pass from Aaron Rodgers into an 80-yard touchdown. The Steelers led 14–6 at halftime and extended that advantage when Gainwell scored again in the third quarter.
A Pittsburgh field goal made it 24–6 early in the fourth. The Vikings then found the passing plays they had been missing. Wentz threw a touchdown to Zavier Scott and later connected with Jalen Nailor for another score. Minnesota’s defense gave its offense one last possession, but the Steelers stopped the final drive before the Vikings could attempt a tying field goal.
Carson Wentz Threw for 350 Yards
Carson Wentz finished with 350 passing yards, two touchdowns, and two interceptions. He completed 30 of 46 passes and began the game by completing his first 11 throws. His yardage total reflects how much Minnesota relied on its passing game, especially while trying to overcome Pittsburgh’s lead.
Wentz’s best moments came in the fourth quarter. He found Zavier Scott for a 16-yard touchdown, then completed a pass to Jalen Nailor for the two-point conversion. Later, Wentz led a drive from Minnesota’s own 1-yard line and threw a 2-yard touchdown pass to Nailor. That score brought the Vikings within three points with 2:08 left.
The passing total was impressive, but Wentz had a difficult afternoon against Pittsburgh’s defense. The Steelers sacked him six times, and two tipped passes became interceptions. He helped Minnesota get close enough to threaten a comeback, but the earlier setbacks were a major reason the Vikings needed one.
Aaron Rodgers Made His Opportunities Count
Aaron Rodgers had a very different stat line. He completed 18 of 22 passes for 200 yards, with one touchdown and no interceptions. Pittsburgh did not ask him to throw as often as Wentz, but Rodgers was accurate when the Steelers needed him. He completed his first 10 passes and helped his team take control early.
His most important throw went to DK Metcalf early in the second quarter. What began as a short pass became an 80-yard touchdown, putting Pittsburgh ahead 14–3. It was the longest scoring play of the game and gave the Steelers room to use their running attack as the match went on.
Rodgers’ 200 yards may look modest beside Wentz’s 350, but the two quarterbacks faced different situations. Rodgers played with a lead for much of the game and avoided an interception. Wentz had to attempt more passes while chasing points against a defense that kept reaching him.
Kenneth Gainwell Led the Rushing Attack
Kenneth Gainwell was Pittsburgh’s leading rusher with 99 yards on 19 carries. He scored two touchdowns, one from a yard out in the first quarter and another from four yards in the third. He also caught six passes for 35 yards, giving him 134 yards from scrimmage.
Gainwell’s scores became more important as Minnesota rallied. His first touchdown put Pittsburgh ahead after the Vikings opened the scoring. His second stretched the lead to 21–6. When the Steelers eventually won by only three points, both rushing touchdowns stood out as essential parts of the result.
Pittsburgh finished with 131 rushing yards, compared with 70 for Minnesota. Jordan Mason led the Vikings with 57 yards on 16 carries, but Minnesota did not score a rushing touchdown. Gainwell gave Pittsburgh steady gains and a dependable option near the goal line, while the Vikings had to find most of their answers through Wentz.
DK Metcalf and Justin Jefferson Each Had 126 Yards
Two of the game’s leading receivers finished with the same yardage total. DK Metcalf caught five passes for 126 yards and a touchdown for Pittsburgh. Justin Jefferson caught 10 passes for 126 yards for Minnesota. Their numbers were equal in yards, but their contributions took different forms.
Metcalf delivered the game’s biggest single play with his 80-yard touchdown. Jefferson gave Wentz a reliable target across more catches, helping Minnesota move the ball throughout the afternoon. One receiver helped create Pittsburgh’s early lead; the other was central to the Vikings’ effort to close it.
Jordan Addison also had a strong game for Minnesota, catching four passes for 114 yards. His biggest gain was an 81-yard catch and run during the Vikings’ late comeback. Steelers linebacker Payton Wilson caught him near the goal line. Minnesota scored later in that drive, but the tackle forced the Vikings to use valuable time before reaching the end zone.
Scott added six catches for 43 yards and a touchdown. Nailor had only one reception, yet it was the late touchdown that made the score 24–21. Those contributions show why Minnesota’s passing attack remained dangerous even after Pittsburgh had built a large lead.
Pittsburgh’s Defense Disrupted Minnesota
The Steelers’ defense recorded six sacks, two interceptions, and 10 tackles for loss. Those numbers help explain the result better than total yardage alone. Minnesota could make gains through the air, but its drives were repeatedly interrupted by pressure, lost yards, and turnovers.
T.J. Watt recorded a sack and an interception. DeShon Elliott also had a sack and an interception, while Patrick Queen made 11 tackles. Payton Wilson finished with 13 tackles, including his important chase of Addison on the 81-yard play. Pittsburgh needed contributions from across its defense to contain Minnesota’s receivers and protect its lead.
The defense delivered one final stop after Nailor’s touchdown. Minnesota got the ball back with a chance to reach field-goal range, but Nick Herbig’s pressure forced Wentz into an intentional grounding penalty. Elliott later broke up a fourth-down pass, ending the Vikings’ comeback attempt.
Offensive Line Injuries Added to the Vikings’ Problems
Minnesota also had to adjust its offensive line during the match. Left guard Donovan Jackson was unavailable, tackle Brian O’Neill left with an injury, and center Ryan Kelly was evaluated for a concussion. Their replacements faced a Pittsburgh defense that continued to put pressure on Wentz.
The Vikings gained only 15 net yards in the third quarter. During that stretch, Pittsburgh increased its lead, leaving Minnesota with a great deal to do in the fourth. The Vikings eventually found success with longer passes, but the earlier struggles meant every remaining minute mattered.
Why the Vikings Lost Despite Gaining More Yards
Minnesota finished with 372 total net yards, while Pittsburgh had 313. The Vikings also held the ball longer. Those figures show that Minnesota produced plenty of offense, particularly through Wentz, Jefferson, and Addison. They do not show how often Pittsburgh disrupted drives or how quickly it scored when opportunities appeared.
The Steelers rushed for more yards, intercepted Wentz twice, and scored on Metcalf’s 80-yard play. Pittsburgh also had 35 penalty yards, compared with 82 for Minnesota. By the time the Vikings scored their first touchdown, the Steelers had already built a substantial lead. Minnesota’s late production almost erased it, but Pittsburgh’s final defensive stop kept the comeback from being completed.
Conclusion
The minnesota vikings vs pittsburgh steelers match player stats show how Pittsburgh won a game that nearly slipped away. Rodgers passed efficiently, Gainwell scored twice, Metcalf delivered a long touchdown, and the Steelers’ defense made life difficult for Wentz. Minnesota answered with 350 passing yards from Wentz, major receiving performances from Jefferson and Addison, and two fourth-quarter touchdowns. The Vikings made the finish dramatic, but Pittsburgh made the last stop and won 24–21.
Frequently Asked Questions
1. Who won the Minnesota Vikings vs Pittsburgh Steelers game?
The Pittsburgh Steelers won 24–21 at Croke Park in Dublin on September 28, 2025.
2. How many passing yards did Carson Wentz have?
Carson Wentz threw for 350 yards. He completed 30 of 46 passes, with two touchdowns and two interceptions.
3. Who was the leading rusher in the match?
Kenneth Gainwell led the game with 99 rushing yards on 19 carries. He also scored two touchdowns for Pittsburgh.
4. How many receiving yards did DK Metcalf and Justin Jefferson have?
Both players finished with 126 receiving yards. Metcalf scored a touchdown, while Jefferson made 10 catches.
5. Why did Pittsburgh win despite Minnesota gaining more yards?
Pittsburgh scored early, ran the ball more effectively, intercepted Wentz twice, and sacked him six times. Its defense also stopped Minnesota’s final drive.



